For surface measurement

TOPE-6, TTJE-6, TTKE-6

Temperature sensor suitable for measurement of machine and device outer surface, especially their bodies, blocks, etc. For the purpose of mounting the sensor only threaded hole and M4 screw is needed. max. temperature: 400°C
RTD, TC type: Pt100, Fe-CuNi/J/ , NiCr-Ni /K/
mounting: screw M4
lead wire: silicone or fiberglass insulated, overbraided Catalog card Manual / DTR +

PTR-24, PTR-25

Temperature sensor suitable for measurement of flat surfaces in a temporary or permanent way.Sensor with handgrip has lead wire finished with miniature plug adequate for joining with portable temperature meter. max. temperature: +800°C
TC type: NiCr-Ni /K/
PVC handgrip
lead wire: fiberglass insulated, overbraided
mocowanie - 2 nakrętki M22x1 Catalog card Manual / DTR +

TTJK-86, TTJE-86, TTJK-87, TTJE-87

Temperature sensor suitable for surface measurement. Hot junction has bigger surface of heat reception because of the connected copper plate or eyelet. This improves sensor contact with the surface. max. temperature +400 °C
TC type: Fe-CuNi/J/ , NiCr-Ni /K/
mounting-by M4 or M3 screw , and by pipe clamp band
lead wire-fiberglass insulated, overbraided Catalog card Manual / DTR +

TTJE-306, TTKE-306

Temperature sensor suitable for measurement of flat screws and mandrels. The hole inside the ring enables sensor screwing to flat surface or mounting on the mandrel for temperature measurement. max. temperature 400°C
TC type: Fe-CuNi /J/, NiCr-Ni /K/
other dimensions of assembling rings
lead wire-fiberglass insulated, overbraided Catalog card Manual / DTR +

TOPE-243, TTJE-243, TTKE-243

Temperature sensor with band clamp for measurement of pipes and shafts. The band clamp enables sensor installation on different types of pipes and shafts which are to be measured. temperature max. 400 ° C
sensor Pt100, Pt500, Pt 1000, Fe-CuNi /J/, NiCr-Ni /K/
installation - clamp
wire - fiberglass insulation + sheath Catalog card Manual / DTR +

TOPE-244, TONE-244, TTJE-244, TTKE-244

Temperature sensor suitable for measurement of pipes and shafts. Rigid sheath is joined to radiator enhancing the area of heat reception. Sensor has a band clamp that enables permanent radiator installation on pipe or shaft. max. temperature 250 °C
RTD type: Pt100, Pt500, Pt1000, Ni100
mounting- by pipe clamp band
lead wire-fiberglass insulated, overbraided Catalog card Manual / DTR +

TOP-AL3, TON-AL3, TTJ-AL3, TTK-AL3

Temperature sensor in Alnico type magnet suitable for measurement of steel surfaces. Magnet application enables quick and easy installation of sensor on steel surface where temperature is to be measured. max. temperature: 400 °C
RTD, TC type: Pt100, Pt500, Pt1000, Fe-CuNi /J/, NiCr-Ni /K/
magnet clamping sensor za pomocą magnesu
lead wire: fiberglass insulation with metal braid Catalog card Manual / DTR +